Showing posts with label lifted increases. Show all posts
Showing posts with label lifted increases. Show all posts

Friday, March 13, 2015

Avoiding Twisted Lifted Increases

I can't tell you how happy I am not to have a snow scene at the top of this entry.  All of the snow is finally gone! (Replaced by rain, unfortunately.) I drove up to Zanesville on Tuesday in both directions.  We had our selection meeting for the Fall issue of Cast On.  There were some lovely submissions.

STUDENT NEWS
Mail delivery has finally normalized but I received very few lessons this week which is just as well as I was traveling.  Now that the weather is nice again I expect things to slow down.


TIP OF THE WEEK
In several of the Basic Lesson 1s I have reviewed lately I've noticed something I have not seen before.  The lifted increases on swatch 4 are twisted.  It is primarily an issue on the left side but some of the right ones have been twisted as well.  

This type of increase is worked in either the right or left leg of the stitch on the needle.  When worked properly, this elongates the leg and creates an attractive visual line as shown in the photograph below.




If you twist the leg of the stitch you do not get this line.  The photograph below shows correct and twisted increases.  The correct ones are marked with the red arrows and the twisted ones are marked with the black arrows.   An increase is made whether you twist the leg or not but the twisted version is more visible and puckers the resulting fabric.


What I am seeing in some lessons is one or two of the increase are twisted.  This means that the increases are no longer mirrored which further draws attention to the twisted ones.  The video shows the correct way to make the increases as well as how the increases can be twisted.  Avoiding Twisted Lifted Increases

KNITTING SALON
I don't want to interfere with any one's weekend plans for the afternoons so Salon will be tomorrow in the morning from 10am to noon.  I plan a trip to Spaldings Donuts at 6:30am in case you need an incentive to get up on Saturday morning.  


CURRENT PROJECTS
Well, when the back of the Wine Dark Sea sweater was almost finished I noticed the top of the waves were not identical to the bottoms.  I spent a few hours deciding if I could live with this and decided I couldn't so I recharted the waves and started over.  Luckily Elf has plenty of the red yarn.  Here is the correct version.




Friday, February 22, 2013

I spent most of the week working on the stranded sweater which was going great until I stood back and looked at trees.  I wasn't happy so I recharted them.  I like them better now but I did lose a day. 

STUDENT NEWS
The Finishing Class was available on Monday.  I got the materials done just in time...Thank you, Carolyn!  I will work on Lesson 2 next week.  The first lesson covers all types of seams.  Lesson 2 covers how to pick up stitches and bands.  Buttonholes will be in the third lesson.

I received quite a few orders for courses.  It had been quiet for a few weeks. 

TIP OF THE WEEK
This week is a continuation of last week's tip, Reading Your Work.  This week will be about increases.  At the end of the tip, there is a quiz.  I will provide the answers next week.

Many knitters are not aware there are different types of increases.  They stick with the one they learned first.  (Until I did the Masters Program that was true for me.)  I have worked with many knitters that are completely dependant on row counters or must place markers in their work so they can tell when it is time to make another increase since they don't recognize what the increase looks like or how to count the rows between increases.  In the photographs that follow I have identified the type of increase and numbered the rows for bar increases, lifted increases and M1 increases.  Here is the video:  Reading Increases

I am not going to discuss how to make these increases as I have already done so earlier.  If you check the index you can find links to the particular posts.

Bar Increases
Bar increases are easy to recognize.  When you knit into the back of the stitch, it creates hole immediately to the left of the stitch with a bar on top of it.  This bar resembles a purl bump.  It is a very noticeable increase in stockinette stitch. 

The mistake many knitters make when trying to count rows after an increase is that they assume the row where the purl bump appears is the row where the increase was made.  The purl bump is created using the stitches ON the needle when you make the increase.  What that means is when you are looking at your work, the row where you see the purl bump is the row BEFORE the increase.  It is important to remember this if you are counting rows.  I've labeled some rows in the photograph below.   In this example the increases are made every other RS row (or every fourth row).  When you are using bar increases on the right and left side of a piece,  there should be the same number of stitches at the selevedges.  In this example, there are two stitches before the increase on the right and two stitches after the increase at the left.  Since a bar increase is made in a stitch, this means that on the right, the increase is made in the second stitch.  On the left it is made in the third stitch from the left selvedge.   I have labeled this as well. 



Lifted Increases
Lifted increases get their name from how they are made.  The leg of the stitch below is lifted to make the increase.  I am not going to talk about how to make this increase but rather what the finished product looks like.  It is a bit trickier to identify lifted increases.  (This is actually a good thing since they won't stand out in the work.)  If you look at the photograph below you can see that the "lifted" leg elongated.  These elongated legs can add an interested decorative detail.  

As for bar increases it can be confusing to count the rows.  I've labeled this in the photograph.  The increase row changes the appearance of the stitches in the row below.



M1 Increases
Like lifted increases, M1 increases slant to the left or right. They are more visible as there is generally a hole at the base of the increase.  Since the horizontal strand between the two stitches on the row below is used, it can pull yarn from the stitches on either side.  This can make the  surrounding stitches smaller.  If you are mirroring the increases, work the M1R at the right side and the M1L at the left side.  If you look closely at the increases in the photograph, you can see that for the right slanting increases the top leg of the increase slants towards the right.  The reverse is true for the ones on the left.  Unlike the lifted increases, this is a very subtle difference. 

I've labeled the rows so that you can see that making the increase changes the appearance of the stitches in the row below.
 



Counting Rows
Patterns generally provide instructions for how often to work increases with language like "every RS row" or "every other RS row".  Instructions like these are easy to interpret.  What can cause confusion is when a pattern states: "every 4th row."  Don't count the row where the increase is made.

Increase Row (RS):
First row after increase (WS)
Second row after increase (RS)
Third rows after increase (WS)
Fourth row (RS)--next increase row.

Increase Quiz
In the three photos which follow, identify the following:


  1. What type of increase is used?
  2. How many rows are between the increases?
  3. How many stitches on the right side are worked before the increase and how many stitches after the increases are on the left?
I will post labeled photographs next week. 

Swatch 1




Swatch 2



 
Swatch 3 



Knitting Salon
Salon will be on Saturday from 1:30-3:30.  There is a basketball game but not until 9pm.  The next opera, Parsifal isn't until next weekend.
 
Current Projects
I spent the week working on the summer sweater.  When I swatched the trees I should have paid attention to the trees as well as the color.  As soon as I knit the first repeat, I knew I needed to change them.  I should have taken a photo before but I didn't.  Here it is.  I am quite pleased with the results.  There is a aspen leaf in the center of the fishes.  This is a nod to the next season, fall, which I have already done.  It has gold bands to represent the gold of aspen trees in the fall.
 



Friday, May 4, 2012

Since I don't get back from Michigan until very late on Friday I will not be doing a blog entry next week.  I am taking my camera and will try to take some photos. 

I've been putting the final touches on the finishing course.  I remembered I needed to knit the homework to demonstrate techniques as well as have finished samples to pass around.  As with everything, it takes more work than you would think!


Stephanie who is attending the retreat came over took one look at the swatches and commented that she was glad she's not taking my class!  The students don't need this many...I need ones to show the final product. 

STUDENT NEWS
I received a few lessons to review this week.  One of the students I inherited for the Swatch to Sweater class sent in her first assignment.  I think I will enjoy teaching this class very much.  The design is very interesting.  I can't wait to see the final sweater. 

TIP OF THE WEEK
The topic for the tip this week is Lifted Increases which can be a bit tricky.  Lifted increases can be worked on either the right or left side of a stitch.  For this reason, they make a nice choice where you want mirrored increases.   An increase (or decrease, for that matter) is "mirrored" when:
  • There are the same number of stitches before (or after) the stitch at the sides
  • It is the same type of increase at both sides
  • The increases on the left and right are the same size
  • The increases on the right slant in one direction and the increases on the left slant in the opposite direction
Where do you use mirrored increases?  The most common use is on sleeves which are knit from the cuff up.  You can also use them to shape necklines on sweaters knit from the top down. 

Lifted increases are generally considered to be the most invisible when they are properly worked.  Unlike M1 increases, they do not leave a hole.


In this example, there are two stitches before the increases on the right and there are two stitches after the increases on the left.  Notice that those column of stitches slant to the right and left and the new stitches slant towards the center.  Several of my students have asked why the right slanting has that name since the increase seems to slant to the left.  The increases get their names from the direction the leg of the stitch used to make the increase slants.  This elongates the leg.


 The right slanting increase is the easiest to work. The left slanting can be tricky.  To make the right slanting increase, work the stitches you want before the increase.  I recommend at least two.  This makes finishing the edge much easier.  Either lift the right leg of the stitch below the stitch on the needle or insert the needle into the purl bump at the back of the stitch on the needle and knit a new stitch.  Then knit the stitch on the needle.   It is very difficult to describe in words how to make these increase.  I suggest watching the video as well. 


The gold pin marks the leg of the stitch you use for the right slanting increase.

The left slanting increase is much more difficult since you use the leg on the left side of the stitch.  The first problem is deciding where to place it.  If you have two stitches before the increase on the right, you need two stitches on the left.  You use the left leg of the stitch.  You can't get to that leg unless the stitch itself is knit first.  That means you have to think about making the increase when there are three stitches on the needle.  Also you can't use the leg of the stitch below the needle for the left side.  You have to go down a row.  Try to use the leg of the stitch immediately below and you will see what I mean.  It just doesn't work.  


The silver pin marks the leg of the stitch you will use for the increase. Until you get the hang of this, you might want to mark it like this. It makes it easier to see when the stitch is knit.


Notice that the legs of the stitches you used are elongated and slant either to the right or left.

Most knitters just are happy they have figured out how to make the increases but if you are doing the Masters Program you have to consider the quality of the increases as well.  What makes a "good" lifted increase.  There should be no holes.  The increases on the left and right should look the same except for the slant.  If the increases on one side are larger, it draws the eye and the pieces is no longer symmetrical.  Whenever you work an increase, try to use just your needle tips and baby it.  Remember, anytime you make a hole bigger, it stays that way.  The other problem with lifted increases is that on the left, the actual stitch knit before the increase sometimes gets distorted.  In the video I give a couple of suggestions for how to fix it.  Lifted Increase Video

The best suggestion I can give you for seeing if the increase "match" is to stand back a few feet and look at it.  Sometimes you just can't see problems when you are looking too closely.

KNITTING SALON
Salon will be on Sunday from 2-5.  For those of you not in Kentucky you may not know that this is Derby Week.  I remember when we first moved here, people were amazed to find out that the rest of the country does not celebrate Derby Week.  I wouldn't dream of scheduling anything other than a Derby party for the first Saturday in May. 

CURRENT PROJECT
I'm plodding along with the cabled sweater.  The back is finished and the front is blocking. 


It has a square neck which will be finished with a shawl collar.  I am still debating if I will have the pattern include sizes for men as well.  If I have time, I will.  I've got a couple of inches of the sleeves finished.